Asbestos Inspection: Things to Consider While Renovating Home in Sydney
Renovation or construction of a home or a building in Sydney requires a range of documents and paperwork to be done before starting the construction process. Identification of asbestos is an important thing to be done while renovating buildings. It is better to approach consultants who specialize in asbestos testing in Sydney because proper identification of the substance is crucial to ensure the safety of the residents and the construction workers. This article looks at various aspects concerning asbestos testing for home renovation or construction in Sydney.
What circumstances demand an inspection?
If planning to renovate or knock down a house built before 2004, there is a chance for asbestos. Approximately one in three homes built in Australia contain ACMs (Asbestos Containing Minerals). Generally speaking, in the houses built before the mid-1980s, there is a high chance for ACMs; for those built between the mid-1980s and 1990s, a medium chance is there, and for those built between 1990-2004, chances are slim. If the house is built post-2004, it is doubtful to contain ACMs because the ban on the manufacture, importation, and use of asbestos and products containing it took effect on 31st of December 2003.
Under the existing legal codes related to asbestos, a person without a respective license, training, and PPE cannot deal with it. Since there is no documentation regarding the installation of asbestos sheeting back in the day, asbestos inspection will help identify the exact position. The pinpointing of the whereabouts of the asbestos sheeting with a detailed report will reduce and prevent the chance of accidental exposure to the hazardous material. This can assist one’s family and the construction workers in being cautious about the material. So, if there is construction happening in a house or any building for that matter in Sydney, the whereabouts of ACM documentation are needed with other paperwork. Read more about Insight into Some Important Kinds of Door Locks.
How is an asbestos inspection carried out?
The asbestos testing in Sydney is predominantly done by consultants who specialize in pinpointing where asbestos or ACMs are present in a home or a building. The trained team in occupational hygiene will come to the site, conduct the inspection and gather samples. They will courier the pieces to a NATA accredited laboratory for reliable and accurate results. The whole procedure, including the assessment, sample analysis, etc., will take around 24-71 hours to complete. Once the results are out, the report will be sent directly to the owner.
Where is it usually found?
The asbestos ban only came into effect in 2003 reveals that many houses and other buildings may still contain asbestos. Many homes built before the 1990s had hazardous material in the form of cement sheeting on eaves, rooftops, ceiling linings, internal and external walls, etc. It can also be located in garages and sheds, fences, windows, power distribution boxes, and so on.
What if there is a presence of ACMs?
Once the presence of asbestos or ACMs is confirmed, the next step is to remove them. Removal of any asbestos-containing minerals greater than licensed asbestos removalists should undertake ten sq. cm. While wearing personal protective equipment for safety, they can remove the identified asbestos content from the building.